savVi supports a wide range of cameras through direct integration (Optimized Offering). Many other vendors and models are supported by the Flexible Offering, through integrations with Agent Vi’s VMS partners. Click here to read more about the Optimized and Flexible Offerings.

All Camera Brands – Flexible Offering
Many camera vendors and models are supported by Agent Vi’s Flexible Offering, through integrations with Agent Vi’s VMS partners. Read more here.
Edge Devices Supported by Agent Vi’s Optimized Offering  
 axis_logo_rgb

Models: (Two digit model numbers represent the entire product series starting with these digits)
F34, F41, F44 (pending selected sensors. Contact Presales Support [email protected]) Note: F34 and F44 support only one channel for analytics
M1004, M1013, M1014, M1025, M1033, M1034, M1054
M11
M2014
M30 (excluding M3006, M3011, M3046)
M31 (excluding M3106)
M32
M7011 (Encoder)
P12 (for P1224 contact Presales Support [email protected])
P13 (excluding P1311)
P14
P32
P33
P39
P54 (PTZ) – certified for PTZ auto-tracking
P55 (PTZ, excluding P5544) – certified for PTZ auto-tracking, must disable Auto-Flip function
P56 (PTZ) – certified for PTZ auto-tracking
P8221 (Network I/O Audio Module) – supported by savVi Digital I/O Tool
P8513, P8514
Q16
Q17
Q19 (Thermal)
Q29 (Thermal)
Q35
Q36
Q3709 (3 sensors)
Q60 (PTZ) – certified for PTZ auto-tracking
Q6000 – supported with 4 separate channels in Flexible Offering, one channel (first one) in Optimized Offering
Q6114, Q6115 (PTZ) – certified for PTZ auto-tracking, must disable Nadir Flip function, Q6128
Q74 (Encoders). Note: Q7424 supports only one channel for analytics (channel #1)
Q84
Q86 (PTZ)
Q87 (PTZ)
V59 (PTZ)
XF40, XP40

Supported Firmware: Device Firmware must be 5.x or later. Latest Firmware from Axis is recommended
Contact: [email protected]
Notes:
1. Corridor format is supported for ARTPEC-4 and ARTPEC-5 based firmware
2. PTZ auto-tracking: Contact Presales Support [email protected]
3. Agent Vi’s products cannot operate concurrently with additional ACAP applications or Axis motion detection

 Cisco-logo

Models:
3000 Series
6000 Series (PTZ cameras – 69xx series – are supported when configured in a fixed home-position)
7000 Series
Supported Firmware: Version 2.5.0-10 or later
Contact: [email protected]

 ´òÓ¡

Models:

Serie 1:
DS-2CD4012F-(A)(P)
DS-2CD4012FWD-(A)(P)
DS-2CD4024F-(A)(P)
DS-2CD4032FWD-(A)(P)
DS-2CD4112F-I(Z)
DS-2CD4112FWD-I(Z)
DS-2CD4124F-I(Z)
DS-2CD4132FWD-I(Z)
DS-2CD4212F-I(Z)(S)(H)
DS-2CD4212FWD-I(Z)(S)(H)
DS-2CD4224F-I(Z)(S)(H)
DS-2CD4232FWD-I(Z)(S)(H)
DS-2CD4312F-I(Z)(S)(H)
DS-2CD4312FWD-I(Z)(S)(H)
DS-2CD4312F-PTZ(S)
DS-2CD4312FWD-PTZ(S)
DS-2CD4324F-I(Z)(S)(H)
DS-2CD4324F-PTZ
DS-2CD4332FWD-I(Z)(S)(H)
DS-2CD4332FWD-PTZ(S)

Thermal cameras:
DS-2TD2136-10/15/25
DS-2TD2166-15/25/35

Supported Firmware: V5.3.0 OP (build 150706)
Contact: [email protected]

 IQeye_color

Models:
Alliance-pro Series (IQA3x), Sentinel Series (IQ86x), 7 Series (IQ76x), Alliance-mini (IQD5x), Alliance-mx (IQM5x)
Supported Firmware: V4.0-069
Contact: [email protected]

 samsungWHT

Models:
SNB: 5003, 5004, 6003, 6004, 6010, 7004, 8000
SND: 5083, 5084, 5084R, 6011R, 6083, 6084, 6084R, 7084, 7084R
SNF: 7010, 7010V, 7010VM
SNO: 6011R, 6084R, 7084R
SNV: 5084, 5084R, 6012M, 6013, 6084, 6084R, 7084, 7084R, 8080
SNZ: 6320
Supported Firmware: Latest firmware from Samsung Wisenet. Camera firmware should support Samsung’s Open Platform version 2.01.
Contact: [email protected]

 Verint

Models:
S1808e (encoder), S1816e (encoder), S5120FDW-DN, S5120FD-DN, S5120BX-DN, V4530BX-DN, V4530FD-DN, V4530FDW-DN
Supported Firmware: Contact Verint
Contact: +1-800-4VERINT or [email protected]

 vivotek_logo_blue

Models:
FD: 8137, 8138, 8152, 8154, 8164, 8167, 8338, 8367
FE: 8174, 8180, 8181
IB: 8337, 8338, 8354, 8367
MD: 8531, 8562
Supported Firmware: Camera firmware should be compatible with VADP 1.3.0.0 or later
Contact: [email protected] or [email protected]